Celebrating over 25 years experience in fire & security monitoring

24/7/365 sales

888-789-3473

 

Tech Tips: How to Add or Remove a User Code on a DSC Power Series Security Alarm Panel

In these regular posts, we’ll walk you through “How-To’s” for equipment that we service, and questions that we are regularly asked from you, our customers.

Today, we’ll look at how to add and remove users’ access codes on a DSC Power Series security alarm monitoring panel.  This is applicable if you use your system at home or for your business or commercial security alarm system.  You may need to add or remove users access codes on the keypad on your system from time-to-time as people are hired into your business, as keyholders change, due to changes to cleaning or maintenance staff or many other reasons. Here are step-by-step instructions on how add or remove users’ Access Codes using the keypad on your DSC Power Series security alarm panel:

How to Add or Remove a User Code on a DSC Power Series Security Alarm Panel

Your keypad may look like this:

i_PK5516_RFK5516 i_PK5501_RFK5501 PK5500

 

 

 

 

 

 

Add an Access Code:

  • Press the * button followed by 5
  • Enter your system’s master code (If you do not know your system’s master code, call FMC’s Service Department)
  • The “Armed” light will illuminate on the keypad, and the “program” or “Syste Indicator” light will begin to flash.
  • Select the two digit users code to program (the system has space for 32 users, so for user # 2, enter 0, 2).
  • If you have a Full Message LCD Keypad (PK5500), use the < or > keys to scroll to the user you wish to program and press *
  • Using the number keys, enter the four-digit Access Code (ie: 1, 2, 3, 4).
  • When programming is complete, you can enter another 2 digit code to program another code, or Press# to exit.

Remove an Access Code:

  • Press the * button followed by 5
  • Enter your system’s master code (If you do not know your system’s master code, call FMC’s Service Department)
  • The “Armed” light will illuminate on the keypad, and the “program” or “System Indicator” light will begin to flash.
  • Select the two digit users code to program (the system has space for 32 users, so for user # 2, enter 0, 2).
  • If you have a Full Message LCD Keypad (PK5500), use the < or > keys to scroll to the user you wish to program and press *
  • With the user selected press *. This will delete the code.
  • Press # to exit Programming
  • You’re done!

*FMC recommends keeps a record of which people are assigned to each 2-Digit User Slot.

Find out more about the benefits of using FMC for your intrusion monitoring needs by calling 1-888-789-FIRE (3473) or click here to get a free, no obligation quote.

This tip is applicable for the following alarm panels:

  • DSC-PC1616
  • DSC-PC1832
  • DSC-PC1864
  • DSC-PC5010
  • DSC-PC5020

Testimonial & Case Study

  • "Fire Monitoring of Canada impressed us with their efficient, professional manner – an approach that not only inspired confidence, but resolved existing service issues with another alarm service provider." - Administrative Coordinator
    View More
  • "Their monitoring & service personnel are knowledgeable, helpful and responsible." - Facilities Manager
    View More
  • "The FMC technician was exceptionally professional in the performance of his duties. He was very organized, focused, safety minded" - Asset Manager
    View More