Celebrating over 25 years experience in fire & security monitoring

24/7/365 sales

800 263 2534


Differences Between Fire Alarm and Fire Monitoring System

ULC fire alarm monitoring pull stationOne of the most common issues we run into at Fire Monitoring of Canada, and this is from current customers and prospective customers, is that there isn’t a clear understanding of what the differences between a fire alarm system and a ULC-listed fire alarm monitoring system are.  Many times, people assume that the fire alarm system in their facility also alerts the Fire Department of an alarm.  Without an understanding of how a ULC fire monitoring system works, many building operators and property managers think  that the fire alarm system is already hooked up to the Fire Department.  Similarly, we are regularly contacted by new developments that are looking for occupancy, but have not accounted for fire alarm monitoring.

In this article, we will look at the primary differences between a fire alarm and a ULC fire alarm monitoring system.

Fire Alarm Systems

Fire alarm systems are comprised of a main control panel, and all of the devices you regularly see installed in a building.  This can include manual pull stations, heat detectors, smoke detectors bells and more.  The “brains” of the fire alarm system is the main control panel, which can be installed at the front entrance to a building, or in an electrical room.  If the panel is installed in a secure room – such as an electrical room, there will typically be a small panel known as an annunciator at the front entrance.  This annunciator lets the fire department know where an alarm is coming from in the building when they arrive, or where a fire trouble signal is coming from in the building.

A fire alarm system is made up of several different input and output components, including:

  • Control Panel
  • Power Supplies
  • Initiating Devices (automatic & manual)
  • Notification Appliances
  • Building Safety Components

Fire alarm systems are designed with one major purpose:  to detect a fire and get people out of the building.  The devices attached to the fire alarm system (such as a heat detector, smoke detector or pull station) activate the fire alarm panel in the event of a fire, and ring bells to get people out of the building.  A fire alarm system on its own does NOT alert the fire department.  This requires a ULC fire monitoring system, which is connected to a set of dry contacts in the fire alarm panel to relay alarm information.

Click Here to Speak With A Fire Monitoring Expert

ULC Fire Alarm Monitoring Systems

So, as we’ve noted above fire alarm systems do not notify the fire department in the event of an alarm from the building, they need a ULC fire alarm monitoring panel to do this work for them.  The fire alarm monitoring system is the “silent partner” in the notification process, and this is what transmits alarms to ULC-listed Signals Receiving Centres, who in turn notify the fire department. The ULC fire monitoring panel is usually located in a telephone room or electrical room in the building.  This panel can vary in colour, but is typically red, and may have a keypad attached.  They also typically look like security alarm monitoring systems which you may have installed in your facility.  In certain circumstances, your security alarm system in your business may also be doing the fire alarm monitoring.  A typical, standalone ULC fire alarm monitoring panel can look like this:

ULC Fire Monitoring Picture Annotated

As we noted above, the fire alarm monitoring panel monitors the fire alarm system through dry contacts.  Typically, we will receive a general fire alarm from the building (we do NOT receive specific zone information from your fire alarm system), a general trouble condition (which indicates a problem with your fire alarm system) and a general supervisory condition (which would indicate an issue with your sprinkler system – if you have one).

ULC fire alarm monitoring panels transmit alarms through a variety of means, depending on whether or not they’re classified as active or passive (read more about that in this blog post).  Typically, in order to comply with ULC-S561, fire alarm monitoring panels will communicate through some combination of phone line, internet or cellular (more info on that here).

Click Here to Speak With A Fire Monitoring Expert

ULC Fire alarm monitoring systems are separate from fire alarm systems, and we hope we’ve cleared some of that confusion up here.  If there’s any further questions, please no not hesitate to contact us.

Learn More

For more resources on fire alarm monitoring, check out these helpful articles:

Contact Us

Fire Monitoring of Canada has been a leader in the fire monitoring and security monitoring industry for over 30 years.  Trust the experts and give your property the protection it deserves.  Call us at 1 800 263 2534, email fminfo@fire-monitoring.com, or fill out the contact form below for more information.

Contact Us

We are proudly serving all of Ontario and monitoring throughout rest of Canada.

Testimonial & Case Study

  • "Fire Monitoring of Canada impressed us with their efficient, professional manner – an approach that not only inspired confidence, but resolved existing service issues with another alarm service provider." - Administrative Coordinator
    View More
  • "Their monitoring & service personnel are knowledgeable, helpful and responsible." - Facilities Manager
    View More
  • "The FMC technician was exceptionally professional in the performance of his duties. He was very organized, focused, safety minded" - Asset Manager
    View More